Remove The Stand - Sanyo AVP-429 Instruction Manual

Remove the Stand

Cautions:
1. Carefully handle the unit during setup and consult authorized service
personnel to ensure successful installation.
2. Before performing work spread cushioning over the base area to lay the
Display on. This will prevent it from being damaged.
3. Disconnect the AC power cord firstly.
1
Rear cover
Take off the rear cover.
Do not remove the stand from
the Display unless using an
optional bracket to mount it.
The appearance of the unit may
differ from the actual one.
To attach the stand, perform the
steps in reverse order.
Introducing the TV
2
Screws
Stand
Loosen the screws on the
Stand to remove the Stand.
3
Replace the rear cover
7