Regulatory Statements; Safety Symbols - RIDGID seesnake cs6x pak Operator's Manual

Introduction
The warnings, cautions, and instructions discussed
in this manual cannot cover all possible conditions
and situations which may occur. It must be under-
stood by the operator that common sense and cau-
tion are factors that cannot be built into this prod-
uct, but must be supplied by the operator.

Regulatory Statements

The EC Declaration of Conformity (890-011-320.10)
will accompany this manual as a separate booklet
when required.
Directive 2014/53/EU
Radio Operating Spectrum / Power
Bluetooth 4.0 2402 – 2480 MHz
Wi-Fi
2400 – 2483.5 MHz
802.11 b/g/n
5150 – 5250 MHz
Wi-Fi
5250 – 5350 MHz
802.11 a/n
5470 – 5725 MHz
This device complies with Part 15 of FCC rules. Op-
eration is subject to the following two conditions: (1)
This device may not cause harmful interference,
and (2) this device must accept any interference re-
ceived, including interference that may cause unde-
sired operation.
Contains Transmitter Module FCC ID: Z64-WL18SBMOD.

Safety Symbols

In this manual and on the product, safety symbols and sig-
nal words are used to communicate important safety infor-
mation. This section is provided to improve understanding of
these signal words and symbols.
DANGER indicates a hazardous situation which, if not avoid-
ed, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not
14.20 dBm
avoided, could result in minor or moderate injury.
NOTICE
19.90 dBm
20.46 dBm
18.32 dBm
19.43 dBm
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
DANGER
WARNING
CAUTION
NOTICE indicates information that relates to
the protection of property.
This symbol means read the manual carefully be-
fore using the equipment. The manual contains im-
portant information on the safe and proper opera-
tion of the equipment.
This symbol means always wear safety glasses
with side shields or goggles when handling or using
this equipment to reduce the risk of eye injury.
This symbol indicates the risk of electrical shock.
CS6xPak – English – 3