Maintenance And Support Product Support; Software Updates; Cleaning; Transport And Storage - RIDGID seesnake cs6x pak Operator's Manual

Maintenance and Support
Product Support
• Go to support.seesnake.com/cs6xpak
• Email support@seesnake.com
• Call toll free 888-477-5339

Software Updates

Critical and routine software updates for your SeeSnake
monitor are released through HQ. Staying up to date with
HQ software prolongs and improves the life and usefulness
of your equipment.

Cleaning

WARNING
To reduce the risk of electrical shock, disconnect all
cords and cables and remove the battery or other power
supply from the CS6xPak before cleaning.
The best way to clean the unit is with a damp cloth. Close
the USB port cover before cleaning. Do not hose down or
allow any liquid or moisture to enter the unit. Do not use liq-
uid or abrasive cleaners. Only clean the display with clean-
ers approved for use on LCDs.
16 – English – CS6xPak
Accessories
Only use accessories designed and recommended for
use with the CS6xPak. Accessories designed for use
with other tools may become hazardous when used
with the CS6xPak.
The following RIDGID products have been designed for use
with the CS6xPak:
• SeeSnake Compact2
• Original SeeSnake Camera Reels
• SeeSnake M Camera Reels
ax
• Dual Battery Kit with Charger
• Single Battery Kit with Charger
• SeekTech or NaviTrack/Scout Receivers
• SeekTech or NaviTrack Transmitters

Transport and Storage

Store and transport your system with the following in mind:
• Store in a locked area out of the reach of children and
people unfamiliar with its purpose.
• Store in a dry place to reduce risk of electrical shock.
• Store away from heat sources such as radiators, heat
registers, stoves, and other products (including amplifi-
ers) that produce heat.
• Storage temperature should be -20°C to 60°C [-4°F to
140°F].
• Do not expose to heavy shocks or impacts during trans-
port.
• Remove the battery before shipping and before storing
for extended periods of time.