Initial Settings - Sanyo VPC-T1284 Instruction Manual

Initial Settings

Setting the Date and Time
The date/time needs to be set if and when:
The camera is turned on for the first time.
The camera is turned on after leaving the camera without the battery for an
extended period of time.
When the date and time information is not displayed on the LCD monitor, follow these
steps to set the correct date and time.
1. Slide the mode switch to [
the button.
2. Press the
3. Select [Setup] with the a
4. Select [Date/Time] with the OO
buttons, and press the
5. Select the date format with the OO
buttons, and press the
Select the item's field with the s
buttons and adjust the value for the date and
time with the OO
The time is displayed in 24-hour format.
After confirming all settings are correct, press
the button.
6. To exit from the [Setup] menu, press the
button.
] or [
button.
button.
button.
button.
/ e
buttons.
]; or press
/ e
/ e
/ a
EN-17