Usb Direct-Print - Sanyo Xacti VPC-J1 Instruction Manual

USB DIRECT-PRINT

Print setup
This camera supports the USB DIRECT-PRINT function. By connecting this
camera to a USB DIRECT-PRINT capable printer, the digital camera's LCD
monitor can be used to select images and initiate printing (DIRECT-PRINT).
1
Insert the card containing the images you want to print in the digital
camera.
2
Use the USB interface cable to connect the camera and the printer.
3
Turn on the power to the printer.
4
Set the selector dial to [Ú].
œ The Direct-Print Screen appears.
CAUTION
œ When the USB DIRECT-PRINT function is active, the camera responds
more slowly than usual to button operation.
œ If the battery pack is used to power the camera for printing, make sure that
the remaining battery charge is sufficient(see page 155).
162
English