Sanyo PLC-XU70 Owner's Manual page 39

Sharpness
Press the Point 7 button to soften the image and the Point
8 button to sharpen the image. (From 0 to 15.)
Gamma
Press the Point buttons to obtain better balance of
7 8
contrast. (From 0 to 15.)
Noise reduction
Noise interference on the screen can be reduced. Select
one of the following to get smoother images.
Off...........disabled.
L1............lower reduction
L2............higher reduction
Progressive
Interlaced video signal can be displayed in a progressive
picture. Select one of the following.
Off...........disabled.
L1............Select "L1" for an active picture.
L2............Select "L2" for a still picture.
Film .........Select "Film" for watching a film.
function, the projector reproduces pictures
faithful to the original film quality.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. The confirmation box will appear and then
select [Yes]. All adjustments will return to their previous
figures.
Store
To store the adjusted data, select Store and press the
SELECT button. Select a level from Image 1 to 4 with the
Point ed buttons and press the SELECT button. A
confirmation box will appear and then select [Yes].
Stored data can be called up by selecting "Image" in the
Image Level Selection on page 37.
Quit
Exit the Image Adjust Menu.
✔
Note:
Progressive cannot be selected when 480p, 575p, 720p, 1035i, or
1080i is selected. (p36)
With this
Store
item
Image Level Menu
Move the red framed pointer to
an image item to be set and
then press the SELECT button.
The confirmation box
will appear and then
select [Yes].
Video Input
39