Using The Rear Audio / Video Input Jacks - Sanyo DS25500 Owner's Manual

QuickTips
Make sure all cable
connectors are fully
seated on jacks.
Always match cables
according to the
colors; for right
RED
audio, for left
WHITE
audio and for
YELLOW
video.
A solid Blue screen
with the words Video1
or Video2 displayed
means that the
Video/Game mode is
selected, but no signal
is being detected at the
Video jack.
Need help?
visit our website at
www.sanyoctv.com
or Call 1-800-877-5032
12

USING THE REAR AUDIO / VIDEO INPUT JACKS

CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT
Switch off TV and external equipment before connecting cables. (Cables are
not supplied.)
1. Connect VCR, DVD, or other equipment's Audio Out (R/L) to the TV Audio
Input (R/L) .
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) In.
2. Connect VCR, DVD, or other equipment's Video Out to the TV Video In
Optional
Connect VCR, DVD, or other equipment's S-Video Out to the TV S-Video In Jack
Using the S-Video jack overrides the rear Video jack
3. Press POWER to turn on the TV. See
4. Press the INPUT key
ment you have connected to the A/V jacks. (Press this key until Video2 displays on the
screen.)
Back View of VCR
A/V JACKS
IN
RF
R- AUDIO -L
CHANNEL
CH3 CH4
OUT
R- AUDIO -L
AUDIO AUDIO VIDEO
OUTPUT INPUT
L
R
S-VIDEO
TV A / V Input Rear Jacks
.
Turn on external equipment also.
to select program source: TV signal or signal from the equip-
VIDEO
VIDEO
UHF/VHF/CATV
75Ω
VIDEO
L
(MONO)
R
.
.
Remote Control
VCR TV AUX
POWER
INPUT RESET
1 2 3
1 2 3
4 5 6
4 5 6
.
DVD