Using Speed Dialing - Sanyo QWEST SCP-8300 Phone Manual

Using Speed Dialing

With this feature, you can dial your favorite entries using
one key press for locations 2-9. (See "Assigning Speed Dial
Numbers" on page 123.)
To use speed dial for voice calls:
From standby mode, press and hold the appropriate
key for approximately two seconds.
– or –
From standby mode, press the appropriate key and
press
The display confirms that the number has been dialed
when it shows "Connecting...".
To use speed dial for Ready Link calls:
From standby mode, press the appropriate key and
press
Ready Link Entries" on page 222.)
The display confirms that the number has been dialed
when it shows "R-Link calling...".
Note:
Speed dialing is not available when you are roaming; when you are
roaming off the network available to you, you must always dial using
eleven digits (1 + area code + number).
Section 2A: Your Phone – The Basics
or .
. (See "Assigning Speed Dialing for
39