Using Caller Id; Responding To Call Waiting - Sanyo QWEST SCP-8300 Phone Manual

Using Caller ID

Caller ID allows people to identify a caller before answering
the phone by displaying the number of the incoming call. If
you do not want your number displayed when you make a
call, just follow these easy steps.
To block your phone number from being displayed for a
specific outgoing call:
1.
Press
2.
Enter the number you want to call.
3.
Press
To permanently block your number, call Qwest Wireless
Repair at 1-877-879-0611.

Responding to Call Waiting

When you're on a call, Call Waiting alerts you of incoming
calls by sounding beeps. Your phone's screen informs you
that another call is coming in and displays the caller's
phone number (if it is available).
To respond to an incoming call while you're on a call:
Press
answers the second call.)
To switch back to the first caller:
Press
Tip:
For those calls where you don't want to be interrupted, you can
temporarily disable Call Waiting by pressing
placing your call. Call Waiting is automatically reactivated once you end
the call.
Section 3A: Qwest Service Features – The Basics
MNO
Shift PQRS
.
. (This puts the first caller on hold and
again.
.
Shift PQRS
TM
before
253