Table of Contents
Advertisement
Making Group Connect Calls
Group Connect call allows you to communicate with up to 20
other members of a user-created group. For information on
creating groups and saving in your Contacts, see "Creating a
Group Connect Entry"on page 118.
Note
When making a Group connect list, make sure you select the
DC number for each contact you add. Go to the contact name
and use the arrow keys to scroll through that contact's
numbers until the Direct Connect number is highlighted.
(See "To tell if a number is a valid Direct Connect number"on
page 51.)
1.
Press Contacts (right softkey).
– or –
Press
2.
Select a group connect entry and press
3.
Continue the Group Connect call as if making a regular
Direct Connect call.
4.
When you are finished, press
Troubleshooting Tip
58
Section 2B: Making and Answering Calls
> History.
If you get an error message saying that your
contact "is not reachable via Direct Connect"or
"this number is not DC capable,"please check to
see that you have highlighted a valid Direct
Connect number.
Currently Sprint phones do not support Group
Connect calls with Nextel and PowerSource
phones. This enhancement is planned for later
2008. If your calls are not going through, please
check to see if your contact is using a Sprint
phone.
.
to end the call.
Advertisement
Table of Contents
