Table of Contents
Advertisement
Making a Sprint PCS Ready Link Call (Group Call)
You can make a Sprint PCS Ready Link call to all members in a Group
entry, which you have in your Sprint PCS Ready Link List. You can
communicate with up to five members at a time.
To place a Sprint PCS Ready Link Group call:
1.
Press R-Link (left softkey) or press
2.
Press Go to (left softkey), highlight the list from which you
want to make a Group call (Company Grps., Personal Grps. or
Outgoing), and press
3.
Scroll to the group you want to call, and press and hold
place the call and take the floor. (You will see R-Link calling... and
Connecting... followed by "You have floor." Continue with the
Sprint PCS Ready Link call as described on the previous page.)
4.
When the call is finished, press
Tip:
The phone beeps if you press
Tip:
You can also make a Group Call after checking the group member. Press
to display group members, highlight
step 3 above.
Tip:
To redial your last Sprint PCS Ready Link call, highlight
from the Sprint PCS Ready Link List.
Section 2K: Using Sprint PCS Ready Link
To make a Sprint PCS Ready Link call to a group member,
select your desired group, highlight your desired group
member, and press and hold
If one of the group members takes the floor, you will see the
member's name and Sprint PCS Ready Link number on the
display.
.
.
.
when another contact has the floor.
and press and hold
<Call Group>
.
and press
Redial
to
during
151
Advertisement
Table of Contents
