Table of Contents
Advertisement
8.
Set the printer settings using your navigation key.
9.
When you are finished selecting the printer settings, press
Print (right softkey).
10.
When finished printing, press
11.
Select Yes and press
to unplug the USB cable from the phone.
Note:
The Index Print mode lets you print out an index sheet of thumbnail
pictures. You will only be able to print Exif JPEG files. Non-supported file formats
on the miniSD card will be displayed as
Note:
While you are connected to the printer, your phone's screen will display
"Phone Off." You cannot make or receive calls.
Note:
Make sure your battery is fully charged before using the PictBridge.
PictBridge Error Messages:
problems. Any printer error messages will be displayed on your phone, informing
you of the specific problems encountered. Please refer to the user's guide that
came with your printer for descriptions, explanations, and possible resolutions
for any error messages.
Section 2J: Using the miniSD Card
Picture to Print: You can select the picture from the In Camera
folder or the miniSD. (You can select up to 99 pictures,
however you can only select from one folder.)
Number of Copies: You can set the number of copies (1-10).
(You cannot specify number of copies when Index Print is
selected.)
Print Size: You can set the print size from Assigned by
Printer, 4"x6", 8"x10", or Letter. (Print Size differs
depending on the type of printer you have.)
Date Stamp: You can imprint the date on your pictures.
Select On or Off. (Correct Date Stamp may not be placed
depending on the type of printer you have.)
. Follow the instructions on the display
.
From time to time you may encounter printing
or
.
144
Advertisement
Table of Contents
