Keypad Tones - Motorola XTN Series User Manual

6881038B80.book Page 21 Thursday, August 30, 2001 5:33 PM
• If you don't hear the talk confirmation tone, you can enable it by pressing and
holding ] as you turn on your radio.
• To disable the End-of-Transmission Tone feature, turn your radio Off and then
back On while pressing and holding ].

Keypad Tones

Every time you press a button on your radio, it beeps unless you turn this feature off.
• Turn your radio On while you press and hold [ .
• To turn Keypad Tones back on, turn the radio Off and then back On again while
you press and hold [.
Talking Range
Industrial
Inside steel/concrete
Model industrial buildings
UHF 2W Up to 250, 000 Sq. Ft.
UHF 1W Up to 200, 000 Sq. Ft.
VHF 2W Up to 180, 000 Sq. Ft.
VHF 1W Up to 150,000 Sq. Ft.
Multi-Level Outdoor
Inside multi-level Flat ground with no
buildings obstructions
Up to 20 Floors Up to 6 Miles
Up to 15 Floors Up to 5 Miles
Up to 10 Floors Up to 6 Miles
Up to 8 Floors Up to 5 Miles
X
21