PROBLEM
No discharge of air
Not Cooling / Unit is
making noise
Odour omission
TROUBLESHOOTING GUIDE
POSSIBLE CAUSE
Cord is not plugged in.
Power is not on.
Pump is not turned ON.
Low or no water in tank,
when COOL is selected.
Damaged Pump or
Calciumdeposits on blower.
New Unit.
Old Unit.
SOLUTION
Make sure power cord is plugged
in and the supply switch in ON.
Try to turn the unit ON by
changing
the
settings of manual knobs on
the control panel.
Turn on COOL function from
control panel.
Refill water tank.
Contact service centre.
When the unit is used for
thefirst time, the Honeycomb
cooling media will have an
odour, which will dissipate
within a week of initial use.
There may be an algae
issue,Replace the honeycomb
cooling
media.
service centre.
operation
Contact
13