Cleaning & Maintenance - Honeywell CO60PM Owner's Manual

WARNING
•
Before cleaning the unit, switch it to the ''off'' position and remove the plug from
the power socket.
•
To clean the outside, use a damp cloth to remove dirt and dust.
•
Never use corrosive elements or any chemicals to clean this product.
•
When the product is not in use, store the unit in a dry place out of direct sunlight.
CLEANING & DRAINING THE WATER TANK
•
Turn the power "off" and disconnect the unit from power supply.
•
Move the unit to a location where it can be drained and remove the
drainagetube/cap (see parts description on page 7).
•
Once the tank is empty, refill with clean water and drain it again. This should be
repeated weekly to maintain the integrity of the unit and to remove particles
filtered from the air.
•
Install the clean water tank to its original position and fill clean water inside the
tank.
CLEANING & MAINTENANCE
11