Obtaining The Software - Sanyo Xacti VPC-CG9 Instruction Manual

USING THE SOFTWARE

Obtaining the software

For Windows operating systems
1
Remove the card from the camera.
h The program to access the website is stored in your camera's internal
memory. This program cannot be accessed while a card is installed in
the camera.
2
Start your computer, and use the supplied dedicated USB interface
cable to connect your camera to the computer.
h Connect the camera's USB/AV terminal to the computer's USB
connector.
3
Turn on your camera (page 29).
h The USB Connection Screen appears on the camera's monitor.
USB CONNECTION
COMPUTER
PRINTER
CANCEL
CANCEL OK
167
English
SET button
To the USB/AV terminal on
the camera
Supplied dedicated
USB interface cable
To USB connector
on the computer