Face Chaser - Sanyo Xacti VPC-CG9 Instruction Manual

FACE CHASER

As you capture a still image, the face chaser detects the subject's face, and
adjusts the brightness and focus in a way that produces a clear and bright
photo of the subject's face.
1
Display the NORMAL Mode Shooting Menu (page 37), select "FACE
CHASER", and press the SET button.
-: The face chaser function is enabled.
.: The face chaser function is not enabled.
2
Select the desired setting, and press the SET button.
h This completes the face chaser setting.
HINT
When the face chaser is set to "ON"...
i Each face in the Shooting Screen is marked with a green frame.
i Faces that are in focus are marked with a double green frame.
i If you press the [
are in focus change to orange.
If you magnify an image that was captured with the face chaser function
enabled, the magnified image will center on the face(s).
i The scene select function setting automatically changes to =.
CAUTION
i The digital zoom is disabled.
i The face chaser function does not work when zooming in or out.
i The face chaser function may not work when the subject's face in the
monitor is relatively small or appears dark.
] button halfway, the frames marking the faces that
100
English