Still Images - Sanyo Xacti VPC-HD1010GX Instruction Manual

CAUTION
When editing video clips...
i In order for video clips to be joined, they must have been photographed in
the same mode.
i Video clips that were photographed in different modes cannot be joined.
Restrictions when X is set
i When the camera is connected to a TV, the image is shown on the camera
monitor in the shooting mode, and on the TV in the playback mode.
i When the [
] button is pressed, a video clip is recorded for about 10
seconds. Recording cannot be discontinued even if the [
pressed again.
i The following recording functions are not available.
Capturing a still image during video clip recording
Zoom
Image stabilizer
Scene select (fixed at =)
Manual exposure
Face chaser recording
High sensitivity mode recording
i If the AE lock setting is active, it is canceled when the X setting is set.

Still images

For still images, you can select either the 4:3 or 16:9 horizontal to vertical
aspect ratio. This menu is also used for shooting sequential shots.
1
Display the NORMAL Mode Shooting Menu (page 49), select
"PHOTO", and press the SET button.
J: Image size is 3264 × 2448 pixels.
M: Image size is 2288 × 1712 pixels (low compression).
L: Image size is 2288 × 1712 pixels (normal compression).
*: Image size is 2496 × 1408 pixels (16:9 ratio).
+: Image size is 1920 × 1080 pixels (16:9 ratio).
G: Image size is 1600 × 1200 pixels.
,: Image size is 1280 × 720 pixels (16:9 ratio).
[: Image size is 640 × 480 pixels.
c: Image size is 2288 × 1712 pixels.
2
Select the desired recording size, and press the SET button.
h This completes the recording size setting.
] button is
94
English