Copy Data From Your Camera To The Computer - Sanyo Xacti VPC-CA8GX Instruction Manual

3
In the installation window, click on [Finish].
h The installation window closes.
h Remove the DVD-ROM from your computer's DVD drive.
<About the Kodak online service>
h When the installation window closes, a dialog box to connect to the
website introducing Kodak's online service appears. Check the [No
thanks !] option button, and then click on the [OK] button.

Copy data from your camera to the computer

Connect your camera to a computer, and copy the desired data to the
computer.
1
Turn on the computer, and use the supplied dedicated USB interface
cable to connect your camera to the computer.
h Connect the cable between the camera's USB/AV terminal and the
computer's USB connector.
2
Turn on the camera (page 30).
h The USB Connection Screen appears on the camera's monitor.
USB CONNECTION
COMPUTER
PRINTER
CANCEL
CANCEL OK
SET button
To USB/AV terminal
on the camera
Supplied dedicated
USB interface cable
To USB connector
on the computer
English
viii