Date And Time Setting - Sanyo Xacti VPC-CA8GX Instruction Manual

DATE AND TIME SETTING

The camera will record the date and time an image or audio recording is
taken so that you can display them during playback. Therefore, before
capturing images, make sure the correct date and time are set.
* To correct the date and time setting, please see under HINT on page 34.
Example: To set the clock to 7:30 p.m. on December 24, 2008
1
Turn on the camera (page 30), and
press the SET button.
h The Clock Set Screen appears.
h Follow the procedures below to
enable or disable the date display
during playback, to set the display
format for the date, and to set the
date and time.
h To display the Recording or
Playback Screen, press the
MENU button 2 times.
SET button
MENU button
CLOCK SET
DATE 2008/05/01
TIME 00:00
DISP Y / M / D
OK
English
32