Checking the Contents of the Package
Safety Precautions
The following safety symbols are used in this manual.
Failure to comply with the precautions below could lead to injury or
death or damage to the instrument.
ii
If any of the contents are incorrect, missing, or appear to be abnormal, please
contact your nearest YOKOGAWA dealer.
Current Probe (Model 701928/701929) Main Body: 1
User's manuals: 1 set
Carrying case:
1
This instrument satisfies the requirements for IEC-61010.
The general safety precautions described herein must be observed during
all phases of operation. If the instrument is used in a manner not specified
in this manual, the protection provided by the instrument may be impaired.
YOKOGAWA assumes no liability for the customer's failure to comply with these
requirements.
Warning: Handle with care. Refer to the user's manual. This symbol
appears on dangerous locations on the instrument which require
special instructions for proper handling or use.
The same symbol appears in the corresponding place in the manual to
identify those instructions.
Do not apply around or remove from HAZARDOUS LIVE conductors.
• To avoid shorting or bodily injury when opening the tip of the sensor
head or when performing measurement, avoid applying the clamp to
bare conductors.
• Do not damage the insulating coating of the conductor under test.
• Never use the probe with wet hands, or when the probe itself is wet.
Electric shock can result.
• Use a digital oscilloscope equipped with the YOKOGAWA probe
interface to power the probe.
• The sensor head has undergone a precision assembly process. Take
sufficient care when handling the probe as sudden changes in ambient
temperature and physical shocks can damage it.
WARNING
CAUTION
IM 701928-01E