Entering My Picturetown User Information - Nikon Coolpix S610C Connection Manual

Q7115_Wireless_EN_1st
Q7115_Wireless_EN.book Page 20 Tuesday, June 3, 2008 7:34 PM
Configuring the Camera's Wireless Settings
n

Entering my Picturetown User Information

Store the information required for my Picturetown user registration with the camera and
send it to my Picturetown. This information is necessary to log-in to my Picturetown
after picture upload. The e-mail address and alias are automatically stored in the
camera's Sender setting (A 33), and are used to identify you as the sender in e-mail
notification sent to recipients with picture upload using Picture Mail.
1
Choose I will create my Picturetown account and
enter the appropriate information in the E-Mail
Address (A 11), Password (A 11), Confirm
Password, and Nick Name (A 11) fields.
Enter an e-mail address comprised of up to 64 alphanumerical
characters, a password comprised of four to ten alphanumerical
characters, and a nickname (alias) comprised of up to 16
alphanumerical characters. Enter the same password in the
Confirm Password field as that entered in the Password field.
Cellular telephone e-mail addresses are not supported.
No error message, or indication that an error has occurred, is sent from the server when
delivery errors occur due to incorrect entry of e-mail addresses.
If you have already registered with my Picturetown, choose I already have my account, and
enter the information already registered in the E-Mail Address and Password fields (A 43).
The dialog shown above is also displayed when Register to my Picturetown is selected from
the Select Action dialog (A 16), and Next is clicked. If the camera has been protected with a
password (A 23, 37), enter the password.
Once all information has been entered, click Next.
20
Q7115_Wireless_EN.book Page 21 Tuesday, June 3, 2008 7:34 PM
2
Check that the information is correct and click
Next.
The Action completed successfully dialog, with options for
finishing or performing another action, will be displayed, and
the e-mail address and nickname will be stored in the camera.
The specified user information and the camera's key information
will be sent to the my Picturetown server over the Internet.
E-mail notification requesting user registration with
my Picturetown will be sent to the e-mail address configured
with the camera. Follow the instructions in the e-mail
notification to continue registration. See "Registering with my Picturetown" (A 41) for
more information.
If you have already registered with my Picturetown, an e-mail message confirming
my Picturetown registration will be sent to the specified e-mail address.
Once you have registered with my Picturetown, proceed as indicated below.
Using Picture Mail: Choose Select another action to perform and click Next to
return to the Select Action dialog. Proceed to "o Specifying Picture Mail
Recipients/Recipient Groups" (A 22).
Not using Picture Mail: Choose Select another action to perform and click
Next to return to the Select Action dialog. Proceed to "p Protecting Wireless LAN
Information Stored in the Camera (Applying a Password/Resetting the Camera)"
(A 23).
Completing wireless settings: Proceed to "q Finishing Wireless Settings"
(A 25).
B
Sending User Information
When sending the information required for my Picturetown user information to my Picturetown
from the Utility, the computer which uses a proxy server can be used. However, some proxy settings
may not allow the information to be sent to my Picturetown.
C
Editing the my Picturetown User Information
When uploading pictures using Picture Mail or Picture Bank after user information has been
registered with my Picturetown, user information (including information stored in the camera's
Sender setting) stored in the camera cannot be displayed or edited using the camera or the Utility
(A 42). In addition, the my Picturetown password cannot be changed using the camera or the
Utility.
Configuring the Camera's Wireless Settings
21