Download Print this page

3M 7501 Datasheet

7500 series half-mask

Advertisement

Quick Links

3
7500 Series Half-Mask
Data Sheet
Main features
The 3M
7500 Series Half Masks are used with twin lightweight
filters, which are fitted by a simple bayonet attachment system,
providing an economical and flexible choice.
Patented valve provides easier breathing while reducing
G
heat and moisture build-up.
Flexible system utilises all 3M gas / vapour and / or
G
particulate filters with a bayonet fitting
Soft silicone material for extra comfort
G
Drop-down feature for added convenience
G
Head harness design provides greater stability
G
making mask easier to wear with other headgear
Well balanced with improved sizing
G
3 sizes:
small
G
medium -
large
Applications
Particulates
FILTER
HAZARD
5911 P1 R
Particulates (Fine
5925 P2 R
Dusts and Mists)
5935 P3 R
2125 P2 R
2135 P3 R
6035 P3 R
(EN143:2000)
2128 P2 R
Particulates and
2138 P3 R
nuisance levels of
(EN143:2000)
Organic Vapours
and Acid Gases
6038 P3 R
Particulates,
(EN143:2000)
Hydrogen Fluoride
Gas up to 30ppm
and relief from
Ozone, Organic
Vapours and Acid
Gases below WEL
-
7501
7502
-
7503
INDUSTRY
Pharmaceutical
Powdered Chemicals
Construction, Quarrying
Ceramics
Refractory Materials
Foundries, Agriculture
Woodworking, Food Industry
Welding, Paper Industry
Brewing,
Chemical Processing
Typical Smog, Inks and Dyes
Aluminium
Welding
Agriculture
Pharmaceutical
Gas/vapour
FILTER
HAZARD
6051 A1
Organic
6055 A2
Vapours
(EN14387:2004)
6054 K1
Ammonia
(EN141:2000)
6057 ABE1
Organic
(EN141:2000)
Vapours,
Inorganic and
Acid Gases
Organic
6059 ABEK1
Vapours,
(EN141:2000)
Inorganic
Gases, Acid
gases and
Ammonia
Organic
Vapours and
6075 A1 &
Formaldehyde
formaldehyde
(EN141:2000)
Mercury and
6096 HgP3
particulates
(EN141:2000)
The tables above list the filters and typical industrial applications.
INDUSTRY
Anywhere conventional paints are
used (subject to usage conditions)
Vehicle manufacture
Aircraft manufacture and
refurbishment
Boat building
Ink and Dye manufacture and
use
Adhesive manufacture and use
Paint and varnish manufacture
Resin manufacture and use
Manufacture and Maintenance of
refrigeration equipment
Agrochemicals
As 6051 but also:
Electrolytic processes
Acid cleaning
Metal Pickling
Metal Etching
As 6057 and 6054
As 6051 but also:
Hospitals and Laboratories
Laboratories and particulate
applications

Advertisement

loading

Summary of Contents for 3M 7501

  • Page 1 Patented valve provides easier breathing while reducing refurbishment heat and moisture build-up. Boat building Flexible system utilises all 3M gas / vapour and / or Ink and Dye manufacture and particulate filters with a bayonet fitting Adhesive manufacture and use...
  • Page 2 Basic Safety Requirements under Article 10 1. Cleaning is recommended after each use. Remove the filters. and 11B of the European Community Directive 89/686, and are thus CE- 2. Clean the facepiece (excluding filters) with 3M ™ 105 Face Seal marked.
  • Page 3 Perform a positive and/or negative pressure face fit check. requires a fit test per wearer before use as per the COSHH regulations 2002. For qualitative fit testing - 3M FT10 or FT30 fit test kits are available. For quantitative fit testing - the 3M 601 adaptor is available.
  • Page 4 Health & Safety legislation, or for more detailed product information, please contact the 3M Health & Safety helpline on: 0870 60 800 60. 3M offers advice on the selection of products and training in the For callers within the Republic of Ireland: 1 800 320 500 correct fitting and usage.

This manual is also suitable for:

75037502