Floor-Standing Type (F Type) Concealed Floor-Standing Type (Fm Type); Required Minimum Space For Installation And Service; Dimensions And Part Names - Sanyo ECO R410A Installation Instructions Manual

■
Floor-Standing Type (F Type)
Concealed Floor-Standing Type (FM Type)

3-25. Required Minimum Space for Installation and Service

Install the unit where cooled or heated air from the unit can cir-
culate well in the room. Do not put obstacles which may obstruct
the air flow in front of the air intake and outlet grilles.
NOTE
Ensure there is adequate space for maintenance of the electrical
component box, air filter, and refrigerant tubes.

3-26. Dimensions and Part Names

Floor-Standing Type (F Type)
4- 15/32" holes (for fastening the indoor unit to the floor
Ø
with screws)
Air filter
Refrigerant connection outlet (liquid tube)
Refrigerant connection outlet (gas tube)
Level adjusting bolt
Drain outlet (20 A)
Power cord outlet (downward, rear)
Refrigerant tubing outlet (downward, rear)
Location for mounting the remote controller
(remote controller can be attached within the room)
2-1/8
C
B
A
Air outlet
2-1/8
Air inlet
Horizontal view
min.
3-15/16"
Length
A
Type
7, 9, 12 41-59/64
15, 18
54-21/64 38-37/64
24
6-11/32 1-1/32
Side panel
Refrigerant tubing space for
downward tubing
Rear-tube outlet
Fig. 3-60
28
Vertical view
min.
3-15/16"
min. 3.3 ft.
min. 3.3 ft.
Fig. 3-59
Liquid
B C
tube
26-3/16 24-7/8
1/4
Ø
37-9/32
3/8
Ø
9-17/64
2-23/32
8-5/32
8-17/64
Unit : in.
Gas
tube
1/2
Ø
5/8
Ø