Outdoor Unit - Sanyo C2432 Installation Instructions Manual

2-2. Outdoor Unit

AVOID:
heat sources, exhaust fans, etc. (Fig. 4a)
damp, humid or uneven locations.
DO:
choose a place as cool as possible.
choose a place that is well ventilated.
allow enough room around the unit for air intake/
exhaust and possible maintenance. (Fig. 4b)
provide a solid base a minimum of 6 inches above
ground level to reduce humidity and protect the unit
against possible water damage and decreased service
life. (Fig. 5)
use lug bolts or equal to bolt down unit, to reduce
vibration and noise.
Hot air
Outdoor unit
Min.
1 inch
Min. 4 inches
Min. 2 ft.
Air in
Air
discharge
Concrete block
4 inch 1 ft. 4 inch
beams or equal
4
Exhaust fan
Heat source
Fig. 4a
Obstacle above
Min.
1 inch
Min.
7 ft.
Air
dis-
charge
Ground
Fig. 4b
Air in
Min. 6 inch
Anchor bolts
(4 pieces)
Fig. 5