Graco Magnum True Airless Project Painter Plus Owner's Manual page 24

Cleanup
8. Lift Prime/Spray Valve to PRIME posi-
tion.
9. Turn ON/OFF switch to ON position.
10. Flush until approximately 1/3 of the
flushing fluid is emptied from the pail.
11. Turn ON/OFF switch to OFF position.
NOTE: Step 12 is for returning paint in hose
to paint pail. One 25 ft (7.6 m) hose holds
approximately 1/2 quart (0.5 liter) of paint.
12. To recover paint in hose, point gun into
paint pail while holding gun firmly to the
pail.
a. Disengage trigger lock (A).
b. Pull and hold gun trigger (B).
c. Lower Prime/Spray Valve to
SPRAY position (C).
d. Turn ON/OFF switch to ON position
(D).
e. Continue to hold gun trigger until
you see paint diluted with flushing
fluid starting to come out of gun.
13. While continuing to trigger gun, quickly
move gun to redirect spray into waste
pail. Continue triggering gun into waste
24
pail until flushing fluid dispensed from
gun is relatively clear.
14. Turn pressure control knob to the low-
est setting.
15. Stop triggering gun. Engage the trigger
lock.
16. Lift Prime/Spray Valve to PRIME posi-
tion.
17. Turn ON/OFF switch to OFF position.
18. Follow Short Term Storage or Long
Term Storage, page 27.
ti25196b
3A5431B EN