Campbell Hausfeld RP4200 Operating Instructions

120-Volt Inflator
RP4200
A
1
Setup Like a Pro
chpower.com
Visit us at
Before using inflator, plug extension
cord (not included) into the extension
cord inlet. Plug extension cord into a
standard 120 volt wall outlet.
What aRe you InflatIng?
Balls, ATVs, Bicycles
or Tractor or or Vehicle
Tires. Tires.
A
Go to Go to
Note: Not all inflatables fall into the above suggested range.
Double check your inflatable for its maximum pressure.
Items requiring maximum pressure less than 20 psi
2
Connect universal
adapter to valve stem
or Insert inflation
needle securely into
the universal adapter.
With universal adapter
Press
in place,
locking lever down.
B
1
Connect
B
adapter to valve stem.
With universal adapter
in place, press
locking lever down.
Note: Use only a Grounded 3-Prong Extension Cord with this product. See Operating Instructions for more details.
3
Push
button to inflate.
Dial pressure
selector to Lo.
Items requiring pressure between 20 psi and 99 psi
2
Actual Pressure
Desired
Pressure
universal
Dial pressure
selector to desired
pressure.
4
Item reaches
desired firmness,
power
Push
power
button off. Gauge
displays actual
pressure.
RP4200 — 120-Volt Inflator
3
Push power
button to
inflate. Inflator
automatically
shuts off when
desired pressure
is reached.
Actual Pressure
5
Repeat
Steps
3 and 4 for more
inflation.
IN728600AV 11/09