Table of Contents
Advertisement
Contact the factory, the factory representative or a local
service company to perform maintenance and repairs.
WARNING
Disconnect the power supply to the appliance
before cleaning or servicing.
Daily:
1. Wash exposed cleanable areas.
Monthly:
1. Blower wheel inlet and motor air vent should be
cleansed if an accumulation of dust or lint is obvious.
Twice a Year: (minimum)
1. Have an authorized service person clean and adjust
the unit for maximum performance.
2. The unit venting system should be examined and
cleaned.
3. Grease the screw jack tilt mechanism via the lubricat-
ing nipple. Use Petro-Canada type OG-2 or equiva-
lent.
Annually:
1. Have an authorized service person inspect the screw
jack assembly for wear. The screw must be replaced
immediately if the end play has reached 0.019"
[0.5mm].
Preventative Maintenance
11
MAINTENANCE
Advertisement
Table of Contents
