Connections To Other Equipment - Sansui HDLCD2600 Owner's Manual

Connections to other equipment

The exact arrangement you use to interconnect various video and audio components to the LCD TV is
dependent on the model and features of each component. Check the Owner's Manual provided with each
component for the location of video and audio inputs and outputs.
The connection diagrams below are offered as suggestions. You may need to modify them to accommodate
your particular assortment of components. The diagrams are intended to show component video and audio
interconnections only.
To connect the LCD TV to a VCR
Left side of the LCD TV
To connect the LCD TV to a VCR with an S-Video cord
If you connect a VCR with a S-VIDEO cord to the S-VIDEO IN jack on the rear of the LCD TV, you must also
connect the audio cords to the AV1 AUDIO(L/R) IN jacks on the rear of the LCD TV. The S-VIDEO cord only
carries the video signal. The audio signal is separate.
Left side of the LCD TV
NOTE:
• When the S-video cord and the video cord are connected to each jack at the same time, the S-video cord
takes precedence over the video cord.
12
To AV1 VIDEO/AUDIO (L/R) IN
Audio/Video cord
or
(not supplied)
To AV2 VIDEO/AUDIO (L/R) IN
To S-VIDEO IN
S-Video cord (not supplied)
Audio cord (not supplied)
To AV1 AUDIO (L/R) IN
To Audio/Video OUT
To S-Video OUT
To Audio OUT