Setting The V-Chip - Sansui HDLCD3200A Owner's Manual

Setting the V-Chip
An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that
you may choose to exclude. The restriction applies to "TV RATING" and "MOVIE RATING" if this data is
transmitted. You may set this restriction separately. To use the V-Chip function, you must register a
password.
To register a password
Press MENU. The menu
screen will appear.
Then press _l or _ to select
(LOCKS) menu.
LOCKS
V-CHIP SET t_
NEW PASSWORD i_
_,V :SELECT _" :ADJUST
2
Press A or V to display the
password entering mode.
LOCKS
[0-9] : SELECT ENTER : SET
EXIT : END
3
4
Select and enter a password
(4 digits) using Number
buttons (0=9), then press
ENTER.
Enter the same password
again to confirm, then press
ENTER.
The password is now
registered and the LOCKS
menu will appear on the
screen.
LOCKS
[0-9] : SELECT ENTER : SET
EXIT : END
"*" appears instead of the number.
LOCKS
[0-9] : SELECT ENTER : SET
EXIT : END
NOTES:
• If you forget the password,
contact Customer Service at 1-
800-289-0980 for assistance.
Your original remote control will be
required.
• To avoid forgetting the password,
write it down and keep in a safe
place.
24