Sanitaire 600 Series Owner's Manual

Sanitaire 600 Series Owner's Manual

Heavy duty upright vacuum cleaner
Hide thumbs Also See for 600 Series:

Advertisement

For location of nearest Eureka/
Sanitaire Warranty Station or service
information call 1-800-282-2886.
Heavy Duty

Vacuum Cleaner

Owner's Guide
600 Series
Index
Important Safeguards ...................... 2
Service Information .......................... 4
Assemble ......................................... 5
Use ................................................... 7
Dust Bag .......................................... 8
Brush Roll Belt ................................. 9
Brush Roll ...................................... 10
Headlight ......................................... 11
Upright
Household Type
www.eureka.com

Advertisement

Table of Contents
loading

Summary of Contents for Sanitaire 600 Series

  • Page 1: Table Of Contents

    For location of nearest Eureka/ Sanitaire Warranty Station or service information call 1-800-282-2886. Heavy Duty Upright Vacuum Cleaner Owner’s Guide 600 Series Index Important Safeguards ... 2 Service Information ... 4 Assemble ... 5 Use ... 7 Dust Bag ... 8 Brush Roll Belt ...
  • Page 2: Important Safeguards

    Use only as described in this manual. Use only manufacturer’s recommended attachments. • Do not use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center before using.
  • Page 3 CONSEILS DE SÉCURITÉ Lors de l’utilisation d’un appareil électrique, quelques précautions élémentaires doivent être observées, incluant les suivantes: LISEZ TOUTES LES INSTRUCTIONS AVANT D’UTILISER VOTRE ASPIRATEUR. AVERTISSEMENT Pour réduire le risque de feu, de choc électrique, ou de blessure: • Ne pas utiliser à...
  • Page 4: Service Information

    If you prefer, you can write to The Eureka Company, Service Division, 807 North Main Street, Bloomington, Illinois 61701, USA. In Canada write to The Eureka Company, 866 Langs Drive, Cambridge, Ontario N3H 2N7. Refer to The Sanitaire Limited Warranty for complete service information.
  • Page 5: Assemble

    HOW TO ASSEMBLE CAUTION: Completely assemble vacuum cleaner before using. Assembly Packet is with owner’s guide. 2-Part Upper Lower Bolt Cord Hook Cord Hook Screws Step 1 Attach the Handle Push the handle sections together. Note: Check to be sure slots in handle are correct, see Detail Align the holes in the handle.
  • Page 6 Step 2 Attach Upper Cord Hook Pull the flexible cord support up toward the top of the handle. Insert the lower half of the cord support into the upper cord hook. Check to be sure slots in handle are correct, see Detail A.
  • Page 7: Use

    HOW TO USE The upright vacuum cleaner is designed to be used on multiple types of carpeting. Do not attempt to use the upright vacuum cleaner on bare floors, as damage to the floor covering may result. Above the floor cleaning tools are available (optional).
  • Page 8: Dust Bag

    Disposable Dust Bags Paper bags play a very important role in the efficiency of a vacuum cleaner. The purpose of a paper bag is to trap dirt. But at the same time the paper bag must be porous enough to allow air to pass through.
  • Page 9: Brush Roll Belt

    Brush Roll Belt The brush roll belt on the upright vacuum cleaner drives the brush to agitate, sweep, and comb the carpet nap. The belt should be checked regularly to be sure it is in good condition. Replace the belt if it is stretching, cracking, or slipping. Cut away any hair or thread wound around the brush roll or the belt pulley because the buildup could cause the belt to rotate unevenly.
  • Page 10: Brush Roll

    Brush Roll The rotating brush roll sweeps and combs the carpet nap. Keep the brush roll free from hair and threads so it will continue brushing. When the bristles of the brush roll no longer touch a straight edge held across the bottom plate, the brush roll is ineffective because the bristles no longer touch the carpet nap.
  • Page 11: Headlight

    NOTE: Turn off the switch and unplug the electrical cord before cleaning unit. To keep the vacuum cleaner looking new, it can be wiped with a damp cloth and a mild soap solution, then thoroughly dried. Never use any type of chemical as chemicals can damage the cleaner.
  • Page 12 ©1999 White Consolidated, Ltd. Part No. 57825A Printed in U.S.A. (4/02)

Table of Contents