Display Detail Setting; Clock; Temperature Unit, Room Temp, Auto Mode - Mitsubishi Electric PAR-33MAA Manual

MA REMOTE CONTROLLER

5. Display detail setting

5.2. Temperature Unit, Room temp, Auto mode

Button operation
[ 1 ]
Display details

Clock

No 24h
Temperature
Room temp. Yes / No
Auto mode Yes / No
Select:
Cursor Cursor
F1 F2 F3
[ 2 ]
Display details
Clock No 24h
Temperature
Room temp. Yes / No
Auto mode Yes / No
Select:
Cursor Cursor
F1 F2 F3
D-54
Select "Initial setting" from the Main menu (refer to D-15), and press
the button.
Move the cursor to the "Display details" with the F1 or F2 button, and
press the
F4
Move the cursor to the "Temperature", "Room temp." or "Auto mode" with
the F1 or F2 button, and change the setting with the F3 or F4 button.
Change the setting with the F3 or F4 button.
[1] Temperature unit setting (The factory default setting is Centigrade (˚C))
• ˚C: Temperature is displayed in Centigrade. Temperature is displayed in
0.5- or 1-degree increments depending on the model of indoor units.
• ˚F: Temperature is displayed in Fahrenheit.
• 1˚C: Temperature is displayed in centigrade in 1-degree increments. This
item will not appear on a sub remote controller.
F4
[2] Room temperature display (The factory default setting is "Yes")
• Yes: Room temperature appears on the Main display.
• No: Room temperature does not appears on the Main display.
Note:
Even when "Yes" is set, the room temperature is not displayed on the Main
display in the "Basic mode".
[3] Auto mode setting (The factory setting is "Yes")
• Yes: "AUTO COOL" or "AUTO HEAT" is displayed during operation in the
AUTO mode.
• No: Only "AUTO" is displayed during operation in the AUTO mode.
Press the
button.
button to save the settings.
Navigating through the screens
• To go back to the Main menu ..................
• To return to the previous screen ...............
P
button
button