Maintenance; Auto Descending Panel - Mitsubishi Electric PAR-33MAA Manual

MA REMOTE CONTROLLER

7 . Maintenance

1. Auto descending panel

Button operation
[ 1 ]
Maintenance menu
Auto descending panel
Manual vane angle
Main menu:
Cursor
[ 2 ]
Auto descending panel
Ref. address
Unit No.
Operation Down / Up
Keep clear, panel descending.
Press Check for Unit No.
Input display:
Cur. Address
Auto descending panel
Ref. address
Unit No.
Operation DOWN
Panel will stop in 30 sec.
Keep clear, panel descending.
Cur. Address
D-40
Select "Maintenance" from the Main menu (refer to D-15), and press
the button.
Select "Auto descending panel" with the F1 or F2 button, and press
the button.
* When using the auto descending panel, always set the "Address" and "Unit
No." with "Service" – "Function setting".
Move the cursor to "Ref. address", "Unit No." or "Operation" with the F1
button to select.
All
Select the refrigerant address and the unit number for the units to whose
Check
falls panel, with the F2 or F3 button, and press the
• Ref. address: Refrigerant address
• Unit No.: 1, 2, 3, 4
• Operation: Down / Up
Press the F4 button to confirm the unit.
<Confirmation of target unit>
/ UP
If the unit being set is unknown, make the setting and then press the F4 but-
ton to confirm.
The air conditioner which is blowing downward is the target air conditioner.
Check
Navigating through the screens
• To return to the previous screen ...............
OFF
Main
button.
button