Cable Connection - Nokia E62 User Manual

2. Select the device with which you want to pair, and
enter the passcode. The same passcode must be
entered to the other device as well.
3. Select Yes to make the connection between your
device and the other device automatic or
confirm the connection manually every time a
connection attempt is made. After pairing, the device
is saved to the paired devices page.
To give a nickname to a paired device that is only
displayed in your device, scroll to the device with which
you have paired, and select Options
To delete a pairing, select the device whose pairing you
want to delete and Options > Delete. To delete all
pairings, select Options Delete
>
Tip: If you are currently connected to a device and
cancel the pairing with that device, pairing is
removed immediately, and the connection is
switched off.
Authorize a device
If you trust a paired device, you can allow it to connect
automatically to your device. You can select from the
following options:
Set as authorized — Connections between your device
•
and the other device can be made without your
knowledge. No separate acceptance or authorization
is needed. Use this status for your own devices, such
as your compatible headset or PC, or devices that
belong to someone you trust.
Set as unauthorized — Connection requests from the
•
other device must be accepted separately every time.
72
Receive data
If you want to receive data using Bluetooth, select
Bluetooth
all. When you receive data through Bluetooth
No to
connectivity, a tone sounds, and you are asked if you want
to accept the message. If you accept, the message is
placed in the
Tip: You can access the files in the device or on
the memory card using a compatible accessory
that supports the File Transfer Profile Client
Assign short name.
>
service (for example, a laptop computer).

Cable connection

all.
Install the USB data cable driver to your PC before you use
a cable connection. You can use the
installing the USB data cable drivers.
Select Menu
Using a USB data cable, you can connect your device to a
compatible PC . Connect the USB data cable to the bottom
of the device.
To change the device type you normally connect to your
device with the data cable, press the joystick.
Select from the following:
Ask on connection
•
asked for the device type every time you connect the
data cable to your device.
PC Suite
•
data cable, and use your device as a modem.
Data transfer
•
or image files from your computer using the data cable
On and My phone's visibility Shown to
> >
Inbox folder in Messag.
Data transfer
Connect. Data cbl..
> >
— Select whether you want to be
— Connect the PC Suite to your device with the
— Access and transfer data such as music
without