Resetting To Original Setting; Device Information; Setting Auto Power Off Or Sleep; Setting Usb Mode - SanDisk Sansa c200 User Manual

RESETTING TO ORIGINAL SETTING

1. Select Settings menu in Main Menu.
2. Select Reset All
3. Select Save to reset to factory settings or select Cancel to stop the reset.

DEVICE INFORMATION

1. Select Settings menu in Main Menu.
2. Select System Info
3. You can read device information on the screen.

SETTING AUTO POWER OFF OR SLEEP

You can set the timer under Auto Power Off setting to turn off Sansa c200 automatically when it is
playing or recording for a certain time.
1. Select Settings menu in Main Menu.
2. Select Power.
3. Select Auto Power Off or Sleep
4. Select the setting you want.

SETTING USB MODE

1. Select Settings menu in Main Menu.
2. Select USB
3. You can select AutoDetect or MSC mode.
Note: AutoDetect will default to MTP mode. The MTP mode supports Windows Media Player 10 only.
You must use the MTP mode to synchronize music files using Windows Media Player 10 for the optimal
system performance.

TIPS, FAQ, AND TROUBLESHOOTING

This chapter provides answers to common questions you may have.
FAQ
Question: How do I copy files to the Sansa MP3 Player?
Answer: Copy files to the Sansa c200, in MSC mode, is just like copying files to a Hard Drive.
Question: What file formats does the Sansa c200 support?
Answer: The Sansa MP3 Player will support MP3, WAV, WMA, secure WMA. Any other formats need to
be converted to these formats prior to transferring to your Sansa c200.
Question: What is MTP?
Answer: Media Transfer Protocol (MTP) is a new protocol and accompanying set of drivers developed
by Microsoft to connect portable devices to a Windows XP PC and synchronize digital media content
between those devices and the PC.