Voice Alerts; Signal-Strength Meter - Escort PASPORT Max Owner's Manual

Ka band = double-brap tone
Laser = solid brap tone
Pop = solid brap tone
Mild
If you prefer, you can change your alert tone settings to Mild mode, which offers softer, simpler alert
tones that are less obtrusive to the driving experience:
X band, K band, Ka band and Pop = Doorbell chime
o Low signal strength = Double chime
o High signal strength = Triple chime
o If alert remains in area more than 15 seconds = Single chime (as a reminder)
Laser = Solid brap tone (Since laser signals are a possible threat no matter how weak, PASSPORT
Max alerts you to all laser signals with a full laser alert.)
See the Settings & Preferences section for details on switching your alert tones.
Cruise Alert
The Cruise Alert feature allows you to modify your alert tones when traveling below a specified speed
(factory default is 20 mph; see Settings & Preferences for details). For all alerts received while traveling
below the specified speed, PASSPORT Max will sound a simple double-beep alert.

Voice Alerts

PASSPORT Max provides digital voice announcements for alerts and selection feedback. If you prefer,
you can turn off the voice feature. See the Settings & Preferences section for details.

Signal-Strength Meter

PASSPORT Max offers four different settings for displaying alerts:
Standard
The Standard option provides information on a single radar signal. When PASSPORT Max detects radar,
it displays the band of the radar (X, K or Ka) and a bar graph of the signal's strength. When laser is
detected, the display will simply read "Laser." If there are multiple signals present, PASSPORT Max will
determine which one is the most important threat to display.
SpecDisplay
The SpecDisplay option is an advanced display for experienced detector users. In this mode, it will
display the actual numeric radar frequency being received. Even long-time detector users will require
some time to get familiar with this new level of information about detected signals. To use SpecDisplay
instead of the Standard bar graph meter, you must select it (Spec) in Preferences.
13