Operating Conditions; Climatic Ambient Conditions; Long-Term Storage; Transport And Short-Term Storage - Siemens SIMATIC TP900 Comfort INOX PCT Compact Operating Instructions

Technical specifications

5.5 Climatic ambient conditions

5.4.2

Operating Conditions

The following information applies to a device installed according to the specifications in these
operating instructions.
The device was tested based on IEC 60721-3-3 Class 3M3 with the following amendments
and limitations:
Type of condition
Vibration according to IEC 60068-2-6
Shock according to IEC 60068-2-27
Shock pulses within the specified range can be transferred to the display but do not impact
the functionality of the device.
5.5 Climatic ambient conditions
5.5.1

Long-term storage

The following information applies to a device that is stored in its original packaging for longer
than two weeks.
The device meets the requirements of IEC 60721-3-1 Class 1K2.
5.5.2

Transport and short-term storage

The following information applies to a device that is transported in the original packaging and
weather-proof packaging, and stored from some time.
The device meets the requirements according to IEC 60721-3-2 Class 2K4 with the following
amendments and limitations:
Type of condition
Temperature
Atmospheric pressure
Relative humidity
Pollutant concentration
Note
If dewing has developed, wait until the HMI device has dried completely before switching it on.
Do not expose the HMI device to direct radiation from a heater.
38
Permitted range
5 ... 8.4 Hz, deflection 3.5 mm
8.4 ... 150 Hz, acceleration 1 g
150 m/s
Permitted range
–20 ... 60 °C
1140 ... 660 hPa, corresponds to an elevation of -1000 to 3500 m
10 ... 90 %
SO2: < 0.5 ppm; relative humidity < 60 %, no condensation
H S: < 0.1 ppm; relative humidity < 60 %, no condensation
2
Compact Operating Instructions, 05/2018, A5E38804191-AA
, 11 ms, 3 shocks
2
Comfort Panels INOX PCT