Pure Cycle Tm (Wf220*) - Samsung WF210 series User Manual

PURE CYCLE
This course is a self-cleaning course that removes mold that may occur inside the washing machine.
1. Press the Power button.
2. Press the Pure Cycle
•
3. Press the Start/Pause button.
•
• Using the Pure Cycle course, you can clean the drum without using a cleansing agent.
•
Never use the Pure Cycle course when laundry is in the washing machine. This may result in
CAUTION
damage to the texture or a problem with the washing machine.
• If you want to use drum cleansing agent, use only 1/10 of the amount of the drum
cleansing agent recommended by the cleansing agent manufacturer. (When using
powder-type cleansing agent , remove the liquid detergent compartment.)
The Pure Cycle Auto Alarm Function
• If the "Pure Cycle" button is lit after a wash, it indicates
that tub (drum) cleaning is required. In this case, remove the
laundry from the washing machine, turn the power on, and
clean the drum by performing the Pure Cycle course.
• If you do not perform the Pure Cycle course, the "Pure
Cycle" indicator is turned off. However, the "Pure Cycle"
indicator will light after two washes have been performed.
This will not result in a problem with the washing machine.
• Although generally, the Pure Cycle Auto Alarm appears once
a month or so, the frequency may differ depending on the
number of times the washing machine is used
WF210AN-02832A_EN.indd 29
(WF220*)
TM
button.
TM
You can only use the Delay Start
function.
If you press the Start/Pause
button, the Pure Cycle course
begins.
cleaning and maintaining your washer _29
2010-02-09 ø¿»ƒ 1:15:14