Samsung SW50USP User Manual page 11

WASH BUTTON
9
SOAK BUTTON
10
REMAINING TIME,
11
DELAY START
TIME, ERROR
DISPLAY
AIR-TURBO
12
BUTTON
WATER LEVEL
13
BUTTON
WATER SUPPLY
14
BUTTON
SW50USPIW-02447K_EN(ÀÓ½Ã).indd 11
Press this button to perform a wash only or to adjust the washing time.
You can set the wash time from between 4 to 30 minutes.
Press this button to perform a soak wash.
This function cannot be selected during a Delicate course.
Soaking is automatically applied during a Clean tub course.
You can set the soak time from between 10 to 60 minutes.
Displays the remaining wash time.
Displays the reserved delay start time.
Displays the error state if a problem occurs in the washing machine so that
you can take action.
Press this button to fast dry your laundry. Each time the button is pressed,
the selection changes in the following order.
30 Min  15 Min  Off  30 Min
This function can only be selected if a spin cycle is set.
The water level is automatically adjusted. However, you can select the water
level manually by pressing this button.
Mid  High  Mid  Low  Extra low  Low  Mid
Each time this button is pressed, the type of water is selected as follows,
Cold  Cold & Hot  Hot  Cold
Setting up your washer_11
2009-05-29 ¿ÀÈÄ 3:27:00