Control Panel - Samsung SW50USP User Manual

setting up your washer

CONTROL PANEL

For more details, see control panel of your washing machine.
14
POWER BUTTON
1
2 MEMORY BUTTON
START/HOLD
3
BUTTON
COURSE SELECT
4
BUTTON
DELAY START
5
BUTTON
FILTER CHECK
6
SPIN BUTTON
7
8 RINSE BUTTON
10_Setting up your washer
SW50USPIW-02447K_EN(ÀÓ½Ã).indd 10
13 12 11 10 9
Press this button once to operate.
Press it again to turn the power off.
Press this button once to operate.
Manually select the functions to use. (Course, Air Turbo, Rinse count)
Your choices are automatically saved when pressing the Start/Hold button.
To use a memorized course, press the Memory button and then press the
Start/Hold button.
- The memorized functions will be displayed on the panel.
Insert some detergent and rinse detergent in proportion to the water level
and close the cover.
This function allows frequently used functions to be memorized so that they
can be easily used when needed.
Use to pause and restart the operation.
To change the washing procedure during an operation,
press this button to stop, and again to restart after changing the procedure.
Each time the button is pressed, the washing course changes;
Fuzzy  Blanket  Delicate  Clean Tub  Quick  Econo  Super
clean  Easy
Press this button to finish the wash at a specified time.
Turn off your washing machine to cancel a reserved delay start.
You can set the delay start time from between 3 to 18 hours.
When the wash is finished, the warning lamp lights up on the filter check.
When the door is opened, it turns off. (This is not a fault.)
When the Magic filter is clogged, foreign materials may start sticking to the
laundry. To ensure a clean wash, please remove foreign materials from the
filter after every wash.
Press this button to perform a spin cycle only or to adjust the spin time.
You can set the spin time from between 1 to 9 minutes.
When only a spin is selected, the spin time will be different from the total
remaining time. This is because the total remaining time includes the actual
spin time and the times for water draining and stopping.
Press this button to perform a rinse only or to adjust the rinse count.
You can set the rinse count up to five times.
8 7 6 5 4 3 2 1
2009-05-29 ¿ÀÈÄ 3:26:59