Installation - Cisco SPA 525G Quick Start Manual

Installation

Caution
Do not insert a telephone line cord into the port marked 'AUX' (1).
Step 1
Turn the phone over to expose the
ports on the back of the unit.
Step 2
Insert one end of the phone cord
into slot marked with a phone
symbol (5). Insert the other end into
the jack at the bottom of the
receiver.
0800 040 8888
v1 - 06/13
Step 3
Optional - Connect the desk stand by
lining up the tabs on the desk stand
with the slots on the back of the
phone. Slide the bottom tabs into
the slots and lightly press down on
the top of the desk stand. It should
easily slide into the top slots.
Do not force.
Step 4
If you are using an external power
source, plug one end of the power
cord into the building's power
source and insert the other end of
the power cord into the phone base (2).
working with daisy
www.daisygroupplc.com