Connecting And Using The Home Theater System - Samsung PS-37S4A1 Quick Manual

Connecting and Using the Home Theater System

Use the Monitor Out ports of the PDP for Home Theater System Connections.
①
DVD Home Theater
☛
◆ Refer to corresponding user's manual from the manufacturer for wiring the
speakers to the DVD Home Theater System (or AV Receiver).
◆ Disable the PDP TV internal speaker to enjoy the rich sound through the
speakers of your Home Theater System.
◆ In this case, enjoy the sound from the Home Theater System while the PDP TV
does not produce the audio.
To Display the DVD Home Theater
! Turn the PDP on and press the SOURCE button to select the Ext.1 (or Ext.2, Ext.3).
@ Be sure to connect the video cable properly if desired external input (Ext.1, Ext.2, or Ext.3)
cannot be selected.
# Play the DVD after activating the DVD Home Theater System.
$ Use the volume control of the Home Theater System while watching the PDP using the DVD
Home Theater, where the PDP TV does not produce the audio.
Rear of the TV
②
AV Receiver Amplifier
Connecting the Home Theater System
①
Connect the monitoring audio out L, and
R jacks of the MONITOR OUT on the
rear-side connection panel of the PDP
TV to the AUDIO IN jacks of the DVD
Home Theater System (or AV Receiver)
using the audio cable.
②
Press the SOURCE button to select the
desired external device connected to the
PDP TV.
③
If you want to hear the sound through
separate speakers, cancel the internal
amplifier.
ENG