Safety Label On The Instrument; Eu Conformity; Sil Conformity; Installation And Operation In The Usa And Canada - Siemens SITRANS LVL200E Operating Instructions Manual

MAN-100411
reasons, only the accessory specified by the manufacturer must be
used.
To avoid any danger, the safety approval markings and safety tips on
the device must also be observed and their meaning looked up in this
operating instructions manual.
2.5

Safety label on the instrument

The safety approval markings and safety tips on the device must be
observed.
2.6

EU conformity

The device fulfils the legal requirements of the applicable EU direc-
tives. By affixing the CE marking, we confirm successful testing of the
product.
2.7

SIL conformity

SITRANS LVL200E fulfils the requirements to functional safety ac-
cording to IEC 61508 or IEC 61511. You find further information in the
Safety Manual "SITRANS LVL200".
2.8 Installation and operation in the USA and
Canada
This information is only valid for USA and Canada. Hence the follow-
ing text is only available in the English language.
Installations in the US shall comply with the relevant requirements of
the National Electrical Code (ANSI/NFPA 70).
Installations in Canada shall comply with the relevant requirements of
the Canadian Electrical Code
2.9

Safety instructions for Ex areas

Please note the Ex-specific safety information for installation and op-
eration in Ex areas. These safety instructions are part of the operating
instructions manual and come with the Ex-approved instruments.
SITRANS LVL200E - Operating Instructions
7