Samsung SPH-m50 User Manual page 67

If no devices are currently listed, press the left softkey
3.
Otherwise press the right softkey
again.
Select Search and press
4.
in-range Bluetooth devices.
Select the device you wish to pair with and press the left softkey
5.
Add to List
Enter the passkey and press
6.
The name of the Bluetooth device is displayed. Press the left
7.
softkey
Highlight the device and press the left softkey
8.
Connection Successful will display if the device is connected properly.
Waiting for Pairing
If you are going to be using a Dial-Up Network (DUN) profile to pair with a PC or
PDA, you will need to allow the other device to initiate pairing with your phone.
To allow your phone to be paired with another Bluetooth device:
Press
1.
Press
2.
If no devices are currently listed, press the left softkey
3.
New. Otherwise press the right softkey
New.
Select Wait for request and press
4.
Select Always Visible or Visible for 3min and press
5.
information on these options, see "Visibility" on page 59.
Enter the passkey and press
6.
Follow the on screen prompts to enter your passkey and press
7.
Highlight the device you wish to connect to and press the left
8.
softkey
device is connected properly.
.
for Done.
, followed by
for Trusted Devices.
for Connect. Connection Successful will display if the
for Options and select Search
.
Your phone displays a list of discovered
.
for Bluetooth.
for Options and select Add
.
.
for Add New.
for
for Connect.
for Add
. For
.
Bluetooth 61