Table of Contents
Advertisement
Troubleshooting
The phone does
I cannot hear the tone
when I press
not work at all.
●Is the phone correctly installed?
●Check if the phone is correctly
(Refer to page 9)
connected.
●Is the power correctly connected
(Refer to page 9)
to the appropriate voltage?
●Check if the power is correctly
(Refer to page 9)
connected.
●Check if the batteries are
(Refer to page 9)
correctly inserted to the remote
set. (Refer to page 10)
●Check if the batteries are
adequately charged.
(Refer to page 10)
●Check if the power is on.
(Refer to page 9)
Internal or transferring
The phone does not ring in the
calls are not working.
base set or the remote set.
●Check if you have installed the
●Check if the batteries are
phone correctly.
correctly inserted.
(Refer to page 9)
(Refer to page 10)
●Try re-registering the remote set
●Check if the batteries are
to the base set.
adequately charged.
(Refer to page 33)
(Refer to page 10)
●Check if the power of the remote
set is on. (Refer to page 9)
●Try re-registering the remote set
to the base set.
(Refer to page 33)
●Check if the BELL OFF is
selected. (Refer to page 21)
35
The morning call/alarm
button.
does not work.
●Check if the current time is
accurately set.
(Refer to page 15)
●Check if the morning call
time is set.
(Refer to page 22)
●Check if the morning call/alarm
function is set.
(Refer to page 22)
I cannot recharge
the remote set.
●Check if the charging connector
is clean.
●If the charging connector is not
clean, use a cotton tip or an
eraser to wipe it clean.
(Refer to page 37)
●Check if the power voltage is
appropriate. (Refer to page 9)
●If you have cleaned the charging
connector but it still does not
work, then please contact your
local service center and
purchase new batteries.
(Refer to page 10)
I hear many noises while
I hear beeping warning
using the remote set.
sounds in the remote set.
●Press
button to reduce
●Check if the base set is currently
the noise.
in use. Try again after the call in
(Refer to page 31)
the base set has been hung up.
●Check if the distance is too far
●Check to see if you are too far
from the base set.
away from the base set. If yes,
(Refer to page 31)
move closer toward the base set.
●Try installing the base set at
(Refer to page 31)
a different location.
●If you see the
the screen, hang up the phone
and adequately charge your
remote set.
(Refer to page 31)
●
When there is a problem with radio communication between
the base set and the remote set, do the following, and if it
still will not work, then please contact your local Samsung
Electronics Service Center.
●
Follow instructions in the order.
Base
�
�
�
Set
Remote
�
�
�
Set
※
See page 33 for registering a remote set
@@
@@ @@
mark on
�
�
36
Advertisement
Table of Contents
