Table of Contents
Advertisement
RECALL DIAL TONE
Hookflash and then dial 18 to disconnect your outside call and receive tele-
phone company dial tone for a new call.
BUSY LINE QUEUING WITH
CALLBACK
If you receive a busy signal when you select an outside line:
• While on that call, hookflash, receive transfer tone and dial 44.
• When the line becomes free, the system will call you back.
• Lift the handset, receive dial tone and dial the telephone number or
the speed dial number again.
NOTE: A callback will be canceled if it is not answered within 30 seconds.
INTERCOM CALLS
CALLING OTHER STATIONS
• Lift the handset.
• Dial the extension number or group number.
• Wait for the party to answer.
• If you hear several brief tone bursts instead of ringback tone, the sta-
tion you called is set for Voice Announce or Auto Answer.
• Begin speaking immediately after the tone.
• Finish the call by replacing the handset.
ANSWERING INTERCOM CALLS
• Lift the handset and you are automatically connected to the ringing
call.
• Finish the call by replacing the handset.
BUSY STATION CALLBACK
When you call another station and you receive a busy signal:
• Hookflash, receive transfer tone, dial 44, receive transfer tone and
hang up.
• When the busy station becomes free, your telephone will ring.
• Lift the handset to automatically call the now idle station.
NOTE: You have 30 seconds to answer or the callback will be canceled.
BUSY STATION CAMP-ON
When you call another station and receive a busy signal but you do not want
to wait for a callback:
• Hookflash, receive transfer tone and dial 45.
• The called station will receive off-hook ring or camp-on tone.
• You will hear ringback tone.
• Wait for the called party to answer.
The called station must release its first call or put it on hold before answer-
ing your camp-on.
5
6
Advertisement
Table of Contents
