Programming The Order Of Playback; Checking Or Changing Programmed Tracks - Samsung MAX-VL85 Instruction Manual

Programming the Order of Playback

You can decide:
The order of the track desired to listen
The track not desired to listen
A maximum of up to 30 order of tracks desired to listen may
be programmed.
Before selecting the track, the CD player should be stopped.
This function may be used simultaneously with the CD Repeat
function.
1
If the CD function is selected, stop the player by pressing
2
Load the selected CDs.
3
Press Program.
Result: The following indications are displayed:
(01 = Program no., DI = Disc no., – – – – = Track no. on the disc)
4
If necessary, select the disc containing the required track by pressing
the corresponding Disc (1, 2, 3) button.
5
Select the required track by turning the Moving Jog knob:
To the left to move back through the tracks
To the right to move forward through the tracks
6
Press Program to confirm your selection.
Result: The selection is stored and
7
To select other tracks, repeat Steps 4 to 6.
8
Press VCD/CD ( ) to listen to the track selection in the order programmed.
9
To...
Listen to the current track again
Listen to the previous track
Listen to the next track
Skip forwards or backwards one
or more tracks
10
To cancel the selection, press
Once if the compact disc player is stopped
Result: PRGM is no longer displayed.
If you open the compartment, the selection is cancelled.
If you select the number of a disc which is not loaded or a
track which does not exist on the CD, the selection skips to the
next programmed track.
You can also use the
tracks in step 5, 9.
Disc 1 Disc 2
Disc 1 Disc 2
4
Band
TUNER
Program
CD Repeat
3,6
Menu
CD u
Shuffle Synchro
.
is displayed.
Turn the Moving Jog knob...
One notch to the left
Two notches to the left
One notch to the right
The appropriate number of
notches to the right or to the left
.
/ buttons to select the required
Disc 3 Disc Change
Disc 3
Select/
VCD/CD TAPE
VCD/CD
8
Enter
Reverse
Mode
Counter
Deck 1/2
Reset
Menu
Me
Dubbing
5,9
Normal High
Preset/Manual Preset/Manual
1,10
Checking or Changing Programmed
Tracks
You can check or change your selection of tracks at any time.
1
Press once if you have started listening to the selection.
2
Press Program.
Result: The following indications are displayed:
(C = Check, 01=Program No, DI = Disc No, – – – – = Track No on the disc)
If you have already programmed 30 tracks, C is displayed
instead of P when you press Program.
3
Press Program again.
Result: The first track selected is displayed, together with the letter C (Change).
4
Press Program one or more times until the track to be changed is displayed.
5
If necessary, press the corresponding Disc (1, 2, 3) button to change discs.
6
Press and or turn Moving Jog to select a different track.
7
Press Program to confirm your change.
8
Press VCD/CD ( ) to start listening to the selection.
Result: The first track selected is played.
When selecting the tracks of numbers larger than 3 digit figures (figures
from the number 100), please use the Digit buttons.
Disc 1 Disc 2
Disc 1 Disc 2
5
Demo
AUX
Band
TUNER
8
2,3,4,7
Mute
Mono/ST Program
Preset
Memory CD Repeat
Phones
Menu
CD Menu
REC/Pause Shuffle Synchro
6
1
ush Eject
1 2
4 5
7 8
Band
+10/0
Timer
AI Sleep
On/Off
1
6
PREV
PREV
Open/Close
Disc 3 Disc Change
Disc 3
Select/
Subwoofer Leve
VCD/CD TAPE
VCD/CD
Sound
Mode
Enter
Reverse
Mode
Counter
Deck 1/2 Reset
Menu
Menu
Dubbing
6
Normal High
Preset/Manual
Preset/Manual
Mute Disc Skip
3
CD Repeat Return
Time Disc
6
Search View
9
Sound Slow
Key Control
Mono/ST.
b #
Zoom
Counter
Deck 1/2
Reset
TAPE
8
VCD / CD
Volume 6
NEXT
NEXT
Tuning
Mode
Volume
15
GB
Echo
Mic Mixing
Min Max
MIC 1
MIC 2
Push Eject