Repeating One or All Tracks
on the Compact Discs
ENG
You can repeat indefinitely:
A specific track on a compact disc.
◆
All tracks on the compact disc selected.
◆
All discs loaded in the carrousel
◆
1
Press the
REPEAT button.
Each time you press the REPEAT button, the repeat mode will change
as follows:
MP3: REPEAT OFF ; REPEAT TRACK ; REPEAT DIR ; REPEAT ALL ;
RANDOM
CD: REPEAT OFF ; REPEAT TRACK; REPEAT DISC ; RANDOM
2
POWER
When you wish to stop the Repeat function, press the
until REPEAT OFF is displayed.
REPEAT OFF:
Cancels Repeat Playback.
◆
REPEAT TRACK:
◆
FUNCTION
REPEAT DIR:
Repeatedly plays all tracks in the selected folder.
◆
Repeatedly plays all tracks.
REPEAT ALL:
◆
REPEAT DISC:
◆
RANDOM:
Plays tracks in random order.
◆
TIMER
ON/OFF
REPEAT
MUTE
RDS PTY
A-B Repeat Playback
You can repeatedly play back a designated section of a CD.
POWER
GIGA
1
Press the
REPEAT A-B button at the beginning of desired part.
REPEAT A-
will be displayed.
◆
2
Press the
REPEAT A-B button at the ending of desired part.
FUNCTION
REPEAT A-B
will be displayed.
◆
VOL
3
To cancel the REPEAT A-B function, press
TIMER
'REPEAT OFF' will be displayed.
ON/OFF
REPEAT
POWER
MO/ST
MUTE
FUNCTION
Function to skip through 10 tracks at a time
RDS PTY
TIMER
ON/OFF
Press the +10 button briefly while playing back a CD or an MP3/
WMA-CD. The 10 tracks after the current one will be played back.
REPEAT
Example: If you press the + 10 button during the track 2 playback, you
GIGA
can listen to the track 12 directly.
➣
MUTE
When pressing the +10 button results in a larger track number than the
total tracks, it skips to the first track.
RDS PTY
VOL
GIGA
MO/ST
14
REPEAT button
Repeatedly plays the selected track.
RIPPING
DISPLAY
SPEED
DISC SKIP
Repeatedly plays the entire disc.
TIMER/CLOCK
SLEEP
REPEAT
PARTY
A-B
RIPPING
TAPE REC
+10
RDS DISPLAY
MP3-CD/CD/TAPE
DSP/EQ
TUNING /ALBUM
RIPPING
DISPLAY
DISC SKIP
SPEED
VOL
REPEAT A-B button again.
TIMER/CLOCK
SLEEP
PARTY
REPEAT
TUNING /ALBUM
A-B
TUNING
MODE
RIPPING
TAPE REC
RIPPING
DISPLAY
DISC SKIP
SPEED
+10
RDS DISPLAY
TIMER/CLOCK
SLEEP
MP3-CD/CD/TAPE
REPEAT
PARTY
DSP/EQ
A-B
TUNING /ALBUM
TAPE REC
RIPPING
+10
RDS DISPLAY
VOL
MP3-CD/CD/TAPE
TUNING /ALBUM
DSP/EQ
TUNING /ALBUM
TUNING
MODE
Programming the Order of CD Playback
(This function is not available during playback of an MP3/WMA-CD.)
You can decide:
The order of the track desired to listen
◆
The track not desired to listen
◆
You can program up to 24 tracks.
◆
You must stop the compact disc player before selecting the tracks.
◆
1
If the CD function is selected, stop the player by pressing the
button.
2
Press the
ENTER (
) button.
Result: The following indications are displayed:
(01 = Program No., -- = Track No.)
3
Select the required track by pressing the
Press the
[ button to move back through the tracks.
◆
Press the
] button to move forward through the tracks.
◆
4
Press
the ENTER (
) button to confirm your selection.
Result: The selection is stored and
5
To select other tracks, repeat Steps
POWER
6
Press the
PLAY ( ) button to listen to the selected tracks in the order
programmed.
7
To stop playing, press the
STOP (@) button once.
FUNCTION
DISPLAY
To cancel the selected tracks, press the the STOP (@) button again.
➣
If you open the Compact Disc Compartment or turn off the
TIMER
TIMER/CLOCK
power, the selection is canceled.
ON/OFF
REPEAT
MUTE
RDS PTY
+10
MP3-CD/CD/TAPE
GIGA
TUNING /ALBUM
VOL
TUNING /ALBUM
MO/ST
STOP (@)
[, ] button:
is displayed.
3 to 4.
RIPPING
DISC SKIP
SPEED
SLEEP
REPEAT
PARTY
A-B
RIPPING
TAPE REC
RDS DISPLAY
DSP/EQ
VOL
TUNING
MODE