Display Function; Setting The Clock - Samsung AH68-02265X User Manual

➣
What is WMA?
WMA means Windows Media Audio, the global standard for audio
signal compression technology.
➣
What is MP3?
MP3 means MPEG1 Layer 3, the global standard for audio
signal compression technology. It uses digital compression
technology to compress original sound data by up to 12 times
without sound quality degradation.
➣
File Compatibility
The unit will playback files created in MP3 format
◆
(Mpeg1.Layer3) with * .mp3 as their extension, and some WMA
files with .WMA extension can't be playback.
Playback of MP2 or 22KHz file is not supported.
◆
➣
How many MP3 files can a CD-R or CD-RW disc record?
The maximum capacity of one CD-R or CD-RW disc is 680MB.
Normally, one MP3 file has a capacity of 4MB, therefore
approximately 170 files can be recorded on a single disc.
➣
Regarding the playback of CD-R/RW
In the case of an original CD-R(Recordable) recorded in audio
◆
CD format, CD-RW(Rewritable) and editing by the user,
playback is processed on the respective completed status. (In
some cases, due to the disc's characteristics and its recording
status, playback may not be available.)
The CD-RW is comparably less reflexive than CD which
◆
causes more time delay to read.

DISPLAY function

You can view all functions available on the display, adjust the brightness
of the display and select the Display/LED either on or off.
Each time you press the DISPLAY button on the remote control or the
DEMO & DISPLAY button on the main unit (MX-C830/MX-C850 only), the
display mode will change as follows:
The Demo function
◆
All functions available on the system appear on the front panel display.
The Dimmer function
◆
The Dimmer function is selected and the display darkens.
LED OFF
◆
The LED is turned off while the dimmer function is working.
Clock ON
◆
The Clock you set is displayed.
POWER
LED/Display ON
◆
All Display and LED are turned on.
FUNCTION DISPLAY
TIMER TIMER/CLOCK
ON/OFF
REPEAT REPEAT
MUTE RIPPING
RDS PTY +10
MP3-CD/CD/TAPE
GIGA
TUNING /ALBUM
RIPPING
DISC SKIP
SPEED
SLEEP
PARTY
A-B
TAPE REC
RDS DISPLAY
DSP/EQ

Setting the Clock

Your system is equipped with a clock which allows you to turn it on and
off automatically.
You should set the clock:
When you first purchase the mini-compact system
◆
After a power failure
◆
After unplugging the unit
◆
☛
For each step, you have a few seconds to set the required
If you exceed this time, you must start again.
1
Switch the system on by pressing the
2
Press the TIMER/CLOCK button twice.
Result: CLOCK is displayed.
3
Press the ENTER ( ) button.
Result: The hour flashes.
4
To..
Increase the hours .......................
POWER
Decrease the hours .....................
5
When the correct hour is displayed, press
Result: The minutes flash.
FUNCTION DISPLAY
6
To..
Increase the minutes
TIMER TIMER/CLOCK
Decrease the minutes
ON/OFF
7
When the correct time is displayed, press
REPEAT
Result: The clock will be set.
POWER
You can see the time, even when you are using another function, by
◆
MUTE
pressing the TIMER/CLOCK once.
You can also use the [, ] buttons or the Tuning/Jog Control
◆
FUNCTION DISPLAY
on the main unit to instead of the TUNING/ALBUM button
RDS PTY +10
in step 4, 6.
TIMER TIMER/CLOCK
MP3-CD/CD/TAPE
ON/OFF
REPEAT
GIGA
TUNING /ALBUM
MUTE
RDS PTY +10
VOL
MP3-CD/CD/TAPE
TUNING /ALBUM
MO/ST
GIGA
TUNING /ALBUM
VOL
TUNING /ALBUM
MO/ST
options.
) button.
STANDBY/ON (
Press the TUNING/ALBUM button.
the ENTER ( ) button.
RIPPING
DISC SKIP
SPEED
Press the TUNING/ALBUM button.
SLEEP
the ENTER ( ) button.
REPEAT PARTY
A-B
RIPPING TAPE REC
RIPPING
DISC SKIP
SPEED
RDS DISPLAY
SLEEP
REPEAT PARTY
DSP/EQ
A-B
RIPPING TAPE REC
RDS DISPLAY
VOL
TUNING
DSP/EQ
MODE
VOL
TUNING
MODE
ENG
or
11