NETGEAR RangeMax WN511T User Manual page 17

Configure your WN511T.
a. Click the WN511T icon in the
Windows system tray to open the
WN511T Smart Wizard Wireless
Assistant.
The Settings tab page opens.
b. Change the Network Name SSID to
match your network.
Tip: Instead of typing in the SSID, you
can use the drop-down list or the
Networks tab to view the available
wireless networks, and choose the one
you want.
c. Click Apply to activate the connection.
You can also enter a profile name and
click Save Profile to store the current
settings.
Tip: Create profiles called work and
home. Then, activate whichever one
you need for your current location.
Basic Setup
NETGEAR RangeMax Next Wireless PC Card WN511T User Manual
Smart Wizard Wireless Assistant Settings page
Tip: Click Help to view the context-sensitive
help information.
Note: The NETGEAR default settings are
Infrastructure mode, with Any (case
sensitive) for the wireless network name SSID,
and WEP disabled. If your WLAN settings are
different from the NETGEAR default settings,
you will not connect. Set up your WN511T
accordingly.
This procedure assumes you are connecting to
a wireless network which is not using WEP or
WPA security. If your network includes WEP
or WPA settings, click the Security tab page
and configure the WN511T accordingly. For
help with these steps, click the Help button in
the Install Assistant to view context- sensitive
help information, or see
Security Features" on page
March 2006
System Tray Icon
"Enabling Wireless
4-7.
3-5